Steinmeyer Roofing, INC

Despite the fact that the majority of commercial roofing systems are built to last, many of them might develop difficulties with time especially when storm damage to roof systems has been done. When the roof is improperly constructed, designed or maintained, problems might occur. 

There are four choices for repairing a failing commercial roof:  full replacement, re-cover, repair, or coat. One of the most reliable roofing companies, Steinmeyer Roofing, Inc will guide you toward the strategies below.

1. Strategy for Re-Coating

UV and heat damage the roof membrane. Water also accelerates aging. Coating metal roofs, single-ply systems, modified bitumen, built-up asphalt roofing and spray polyurethane foam installations can help slow this process. Extending the life of a roof implies less frequent rip-off and disposal.

Recovering an old roof system provides environmental advantages. It reduces landfill waste and, because the old roof assembly undoubtedly has some R-value, it may increase your facility’s energy efficiency. You will also need less insulation material.

2. Strategy for Roof Replacement

If you don’t have the funds to replace your roof all at once, there are several options.

• Dismantle it. It doesn’t mean the roof itself, but rather the project. Start with the worst parts of your roof and work your way out to the regions with the least damage. You will be able to control your costs and ask for a realistic roof estimate in more reasonable chunks as a result of this.

• Choosing between repair and replacement. It’s possible that the harm you’ve sustained can be repaired rather than replaced. Certainly, if you can accomplish this, you will save money in the short run, allowing you to set up funds for future replacement.

3. Strategy for Repairing

Repairing an existing roof membrane or replacing sections or parts of a roofing system becomes difficult to explain due to long-term exposure to the elements or the roof’s senior age. If the damage is substantial, a maintenance coating rarely fixes the issue. Replacing degraded base flashings or pitch pockets may stop a specific leak, but replacing isolated components is rarely cost-effective. Also, integrating new repair pieces with the old degraded roof membrane is problematic.

If the source of water infiltration is misidentified, the roof may need to be repaired numerous times to discover the leak. As the roof leaks, more interior finishes are ruined, and repair costs rise.

If the roof is leaking due to age, the entire system will need to be replaced. In certain circumstances, the money would be better spent repairing or replacing the roof.

4. Strategy for Re-Cover 

Roofs that are damaged may not always need to be replaced. The most effective method is to re-cover if the roof is essentially sound and has proper installation. If a roof only has one membrane, it is often possible to add another on top. Keep in mind, however, that a roof can only be re-covered once. Here are some of the reasons why you might want to re-cover your roof:

• The roof is well insulated, although the membrane has reached the end of its useful life.

• Prior to this, the roof had not been re-covered.

Benefits:

• It’s less expensive than a complete replacement.

• A partial tear-off is less disruptive than a complete tear-off.

• Roofs are less likely to be exposed to the weather.

• There are new extended warranties available.

Steinmeyer Roofing, Inc. is one of the most reputable roofing companies in Illinois, committed to offering industry-leading products and exceptional workmanship in order to ensure our clients receive the comfort and efficiency they deserve. Call us today at (217) 302-9355 or fill out our contact form to request a free, no-obligation quote.